Who says gaming is costly and can not be afforded by everyone? Well, it certainly is not cheap, but if you are willing to build your gaming, then the task can be done in $1000.
With a budget of $1000, you would have to make little to no compromises with the primary focus being on the quality and performance of your PC. You are now ready to enter into the realm of the premium build, where your PC will be capable of running at up to 1080 to 1440 pixels.
Not only will it allow you to max out your games to 1440 pixels, but also you might be able to experience VR and 4k gaming, which is the near future of the gaming world.
Building your PC allows you to be versatile so the performance levels can be managed and varied. Almost everything that you add in your PC build is interchangeable, whether it involves adding extra RAM, swapping out the GPU, or updating storage for keeping up with the pace of technology.
In this guide, we have put together the best gaming PC builds under 1000. With these components, you would be able to build a robust gaming system.
Components Under A Budget of $1000 To Build A Gaming PC
Processor – AMD Ryzen 5 3600 6-Core, 12-Thread Unlocked Desktop Processor with Wraith Stealth Cooler
In contrast to the Intel Core i7-8700K, the Ryzen 3600 has substantially low power consumption. This is due to shifting to the 7nm process that the power draw is as low as 86.17 W while the Intel processors can hit up 110.68 W.
Compatible with the AM4 CPU socket:
AMD has undoubtedly upgraded processors as the Ryzen 5 3600 steps up to X570 chipset, which is consistent with the PCIe 4.0. But for people who don’t want to upgrade to X570, the Ryzen still offers support with the AM4 CPU socket. This means that you can improve your PC build without swapping the motherboard as you install a new processor.
Slim cooler to keep your chip from heating up:
The Ryzen 5 3600 comes with the 65W Wraith Stealth that is capable of keeping your chipset cool. This saves you from spending extra dollars on liquid-cooled units. However, you can get a third-party entry-level cooler for peace of mind.
Better memory capabilities:
AMD has stepped up its game with the Ryzen 5 3600, which has improved overclocking and memory potential. The chips support DDR4-3200, which is an upgrade from the previous generations.
- High gaming performance
- Low power consumption
- Supports PCIe 4.0
- No integrated graphics
Motherboard – MSI Arsenal Gaming AMD Ryzen 2ND and 3rd Gen AM4
Increased memory support:
When it comes to performance, the most beneficial aspect of the B450 is better memory support. It can now support storage up to 64 GB with four memory slots and is compatible with DDR4-3466.
Better storage capabilities:
The B450 motherboard comes with storage options that were quite beyond expectations in this budget. There are six SATA ports that are compatible with RAID 0, 1, and 10 arrays. There is also a SATA M.2 slot and a single PCIe 3×4 that can support drives of M.2 22110.
More USB ports:
There are two USB 3.1 Type-A Generation 1 and two USB 2.0 ports in the MSI B450. The rear panel contains a single Type A, a single Type C, and a pair of USB 3.1 Generation 2 ports. You can also get more USB options with two or four more USB slots with internal headers.
Improved overall performance:
The performance of the MSI 450 is improved and more excellent concerning the power consumption. The 2W idle power draw has a vital role to play where the Tomahawk can perform well at even minimum power consumption.
Upgraded heat stinks:
The upgraded heat sinks in the Tomahawk B450 have a more futuristic and cleaner look, with a light grey finish. The heatsink covers the MOSFETS and extends further to the rear IO of the B450.
- Six fan headers
- Improved USB options
- Decent VRM
- RGB header cannot be controlled independently
Simple yet elegant design:
Vulcan Z has a simple design with an overall decent look. This will look great in many PC builds as the black PCB goes well with the heat spreader. The height of this memory kit is ideal, provided that it is not extended like the other RGB options available out there. The T- force logo, together with the slight angular touches on the aluminum frame, give a good overall look.
The T-Force Vulcan Z weighs 30 grams, which is not that high in contrast to others. This is because of the low-profile design, which is not based on bulky metal frames. The perfect weight and height make the kit a considerable choice for PC builds.
Good memory capacity:
Although 8 GB is the standard memory when it comes to gaming PCs, the modern applications take up much more memory. So, people who like to multi-task and wish to use their gaming PC for editing and other tasks can significantly benefit from the 16 GB memory kit.
Vulcan Z is one of the most DDR4 memory kits by T-Force. It is featured with support for AMD and Intel platforms with a frequency of up to 3200 MHz. Being complete to the usual offerings by sub-brands, the Vulcan Z can be labeled as a good value for money product.
- Impressive overclock potential
- Works smoothly during gaming
- Solid heat sink design
- The temperature sensor is absenT
Can handle more workload:
The Crucial P1 carries a ratio of 1 GB DRAM per 1 TB NAND, which is commonly found in many mainstream SSDs. The extra DRAM allows for more marginal improvements as the SSD can take up a higher workload, as a more substantial amount of data.
Great for common desktop usage:
The caching of Crucial P1 greatly affects its endurance and performance. It can be used in conventional desktops, which is more read-heavy and does GB of rarely writes like when installing software.
The P1 series comes with a solid guarantee of 5 years. This means that over five years, you can write about 54 GB of data daily, and your SSD will still be covered under warranty.
The Crucial P1 SSD weighs 10 grams and has the same M.2 ‘gum stick’ form like other drives in the Crucial family. The 500 GB drive can have a read speed of up to 1.9 GB per second. This performance is much better in contrast to the data a SATA interface can muster.
- Outstanding value for money
- High read and write speed
- A lower capacity option could have been added
High-quality cooling layout:
The AeroCool Cylon has an attractive cooling design that supports three 120 mm fans in the front and two fans at the rear and top. This will generally help you if you have a warmed-up GPU. The cooler height is bounded to 155 mm, which means that if you want, you can install a high-end air cooler in the Cylon.
Tempered glass panel:
The acrylic side window, together with RGB illuminated front panel, allows you to show off your PC components. The LEDs’ effects are quite subtle where you have multiple options to choose from. However, the lighting is not controlled by software and has a built-in controller.
The AeroCool mid-tower has enough space to fit in a full-sized graphics card and ATX motherboard. There is a frame of the right side of the case which can be used to cover and handle your cables.
Easy cable management:
The unique perk of AeroCool lies on its back, which is cable management. A cable cover is included to keep the cables well managed. There is a generous amount of cable tie points so that the wires can be routed properly.
- Features cable management
- Stealthy and sleek design
- Drive trays are present
- Plain rear fan
Graphics Card – Gigabyte Radeon Rx 5700 Xt Gaming OC 8G Graphics Card
Customizable RGB lighting:
The RX 5700 comes with customizable RGB lighting that you can control with the Gigabyte’s RGB fusion tool. The light can be set to a different mode like cycling, solid, or blinking. Some LEDs near the power connectors indicate whether the PSU is connected and functioning properly.
Fine cooling system:
The RX 5700 is featured with three 80 mm fans that have ribbed fan blades to add to the rigidity and reduce the levels of noise. The fans work in alternate directions to maximize the airflow through the heatsink fans and minimize turbulence.
The overall design of the RX 5700 is 2.5-slots wide, where the cooler lowers temperature effectively and works without making any heavy noises.
The output ports on the Radeon RX 5700 XT have a trio of full-size display ports together with one HDMI port.
- Great mid-range performance
- Includes backplate
- Improved performance
- Poor overclocking capabilities
Choosing the right parts for your gaming PC can seem like a daunting task at first, but once you have the right components in hand, you can build a solid gaming PC in no time. Besides the essential components, we have covered three important things that you should keep in mind when buying and putting the gaming PC components together.
Don’t neglect the PSU
The power supply(PSU) of the gaming PC may seem like an excellent area to save money. You might be tempted to opt for the lower quality to get a better graphics card instead, but you should not. The power supply is known to be the beating heart of the PC that keeps everything up and running.
If you opt for a cheaper power supply option with a lower wattage rating, it may struggle with handling load from the high-end components of the PC.
Get a good PC case
An ordinary PC case will never offer you plenty of space, leaving the internal of the PC cramped up once all your components have been installed. Also, any such case does not provide many options for managing cables. You should opt for a high-quality PC case like the one mentioned above.
A good cable management design allows us to anchor cables with more ease. A good PC case will also naturally have better ventilation as it offers good fan placement. Cooling of the PC is a vital concern, especially when you would be using the PC primarily for gaming.
Consult the experts
Asking an expert is always a good option once you have decided to build your gaming PC. You can easily ask a gaming PC about your concerns via online forums. Many people don’t bother to do so, but it certainly is helpful in the long term as you would be well aware of every function of your gaming PC. Getting a piece of advice prior to getting your gaming PC components can be quite a money saver.
Whether you are building a PC for the first or fiftieth time, you can put it together by getting high-quality components and that too in your budget. We have tried to list down the top six components for gaming PC builds that would ideally suit your budget of $1000.
With the pros, cons, and in-depth reviews of features, you will be well aware of what you are getting for your gaming PC and whether it will benefit your gaming in the long term or not.